TECHNOLOGY

sen6 monitoring system + AI

sen6 tech data

Architettura

Connessione indipendente NB-IoT

Connessione WiFi per lo streaming dei dati e gli aggiornamenti del firmware OTA (Over-The-Air)

Double processor architecture (System + ML dedicated CPU)

Micro SD slot store and forward data

Sensori inerziali

Sensibilità tecnologia sen6 [mg/LSB]: 0,122 | 0,244 | 0,488 | 0,976

sen6 tech Sensitivity [mg/LSB] 0,122 | 0,244 | 0,488 | 0,976

Tecnologia sen6 Range [g]: ±250 | ±500 | ±1000 | ±2000

sen6 tech Sensitivity [mg/LSB]  8,75 | 17,50 | 35 | 70

High-performance triaxial magnetometer: ±50 gauss

Gps

The device acquires location information through positioning systems:

BeiDou, EGDE, Galileo, GLONASS, GPS, GNSS

Sensore ambientale

Each environment sensor has an independent adjustable ODR: rrom 1 to 1.600 Hz. sampling rate

4 on-board temperature sensors: surface, exterior, interior of the device. Fourth external sensor can be added.

Three of the three temperature probes are available as connectors, so they can also be remote outside the device

Con un intervallo tra 300 hPa e 1200 hPa e un'accuratezza di ±0,25%

Precisione ±3% dell'umidità relativa

Con un intervallo tra 60 Hz e 20 kHz - 24 bit

Volatile organic compounds are divided into three categories, depending on the sources of origin:

anthropogenic compounds, originating mainly from human activities, such as petroleum-derived solvents and combustion products; They include benzene, toluene, methane, carbon tetrachloride, ethane, etc. In particular, the industrial use of fossil fuels produces VOCs, either directly from products (e.g. petrol), or indirectly as by-products (e.g. motor vehicle exhaust gases).

biogenic compounds of predominantly natural origin, such as terpenes (α-pinene, β-pinene, limonene, sabinene, etc.), which are contained in plant essential oils;

anthropogenic and biogenic compounds, such as isoprene (widely synthesized industrially for the production of plastics and synthetic rubbers)

I/O

RS 485 interface - Modbus

Caratteristiche elettriche e ambientali

Direct 12÷24 Vdc

USB Tipo C 5 Vdc

Average power consumption 200mA max @12V.

Certified internal battery

it_ITItaliano

Pad 3 | Stand B037 

Vieni a trovarci ad SPS ITALIA 

Vi mostreremo SEN6il sensore intelligente per il monitoraggio e la manutenzione predittiva.

Vedrai sen6 in azionevedrai come SEN6 trasforma qualsiasi macchina, anche obsoleta, in SMART e connessa

Parma, dal 13 – 17 Maggio 2025

Scrivi per ricevere l'invito info@sen6.net

SPS ITALIA

SPS Italia è la fiera di riferimento per automazione e il digitale nell’industria,un appuntamento imperdibile per chi vuole scoprire le tecnologie più innovative per la smart factory.